Gauge and Gauge Adapters

• ¼ and ½-inch NPTF pipe threads (lower mount)

NOTE: RAM-PAC® recommends the use of gauges in all hydraulic systems connected with power pumps.  Gauges permit the user to monitor the loads on cylinders.  This is especially important where loads are not precisely known in advance.

IMPORTANT:  All gauges require a gauge adapter.

HA-14 Maximum reading indicators are available for all 4 ½” diameter gauges.

Note:  Pressure reading only gauges work with any cylinder.

*  Measures load and pressure when pushing and pressure only when pulling