Cart is empty
MANUALLY OPERATED "PUMP MOUNTED" VALVES
- Operate efficiently at high and low pressures
- Hand-Operated
- Pressure can be adjusted from 1,000 to 10,000 psi
- Polished steel control rotor and bronze spools for long life and consistent operation
- Models for use with both single-acting and double acting cylinders
- Field interchangeable on HP-520 (manual) and HP-560 (electric) series pumps
- per page
| Model Number | Description |
| HV-2 | Two-way, two-position valve for use with single-acting where a "hold" position is not required |
| HV-3-1 | Three-way, three-position, rotary shear seal , non-interflow valve for single-acting cylinders which must raise and hold a load. Provides positive load holding between handle shifts. Maintains complete holding level until handle reahes "return" position. Has additional port for oil cooler option |
| HV-4-1 | Four-way, three-position valve for use with double-acting cylinders. Same operation as HV-3-1 except has an extra port for use with double-acting cylinders |
| HM-1-1 | Manifold for use with remote-mounted valves described below. |
| HA-37 | Shut-off valve, 3/8 inch NPTF female. Permits positive shut-off and throttle control in multiple ram set-ups to 10,000 Psi. |
- per page
Accessories